A-A-54371
The heating pads shall be fabricated from 100 percent cotton material, with construction of 70 ends per inch minimum and 58 picks per inch minimum, weight of 10.0 oz. minimum. The size of the pads shall be approximately 10 inches by 12 inches and shall be sewn, quilt-like, into approximately 12 rectangular compartments (2 rows of 6). Each compartment shall contain approximately equal amounts of dry gel totaling 17 oz. minimum per heating pad. The gel shall be a commercial hydrous aluminum silica, evenly sized pellets. The pellet size shall be such that it shall be retained within the pad described above.
Loops shall be sewn on each corner of all pads. The loop material shall be 100 percent cotton and shall be color fast to 200°F. The two loops sewn onto one edge of the pad (the 12 inch pad dimension) shall be a dark color; the two loops sewn on the opposite edge shall be white. These loops shall enable the pads to hang from hooks on the internal rack and shall support the full weight of the completely soaked pad (approximately 5 pounds).
The entire apparatus shall not weigh more than 140 pounds without heating pads.
The apparatus shall operate on 115 volts, 50-60 Hz electric power. A three conductor power cord at least six feet long, with hospital grade plug shall be provided.
All items shall conform to applicable requirements of a nationally recognized standard for the safety of medical equipment of the issue in effect on the date of solicitation. All items shall be approved as conforming to such a standard by an independent nationally recognized testing laboratory.
The apparatus shall be furnished with two (2) complete sets of instructions for operation, maintenance, and repair.
Finish. The apparatus shall be fabricated from materials which are inherently resistant to corrosion, or which are treated to render them corrosion-resistant. Where painting or plating is used, appropriate cleaning and priming procedures shall be performed prior to finishing. Finish shall be equivalent or superior to that of comparable commercial equipment, and shall be free of gaps, scratches, chips, rust spots, pitting, and other imperfections.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business