A-A-54371
d. Removable internal rack
e. External side rack
f. Drain valve with handle and a male hose fitting
g. Hose with male and female fitting at opposite ends
h. Casters
i. Twenty-four heating pads, gel-filled
The apparatus container and both racks shall be constructed of corrosion-resisting metal (stainless steel 300 series). The approximate dimensions of the container shall be 20 inches wide by 32 inches long by 33 inches high. The external side rack shall be approximately 20 inches wide by 13-3/4 inches deep by 28-1/4 inches high.
The working water capacity of the container without pads shall be 50 gallons minimum, with heater rated at 1500 watts minimum. Thermostatically controlled water temperature shall be 160°F. Capability to change control temperature set-point shall be provided by a temperature adjustment mechanism. A secondary safety feature shall interrupt electrical heater power if water level becomes low or if water temperature exceeds 180°F.
The removable internal rack shall be of proper size and strength to support at least 24 fully soaked, silica, gel-filled heating pads of the construction, size, and weight described below. This rack shall be designed to allow for easy pad placement or removal, one at a time if desirable without the need to move other pads or to remove the internal rack from the cabinet.
The external side rack shall contain 3 shelves, with the top shelf of sheet metal. The other two shelves shall be sheet metal or wire rack type. Shelves shall be suitable for storage of towels and heating pads. Total weight of shelf unit shall be 20 pounds maximum and shall withstand a load of at least 25 pounds. Mounting of this external rack shall be accomplished by hanging from the built-in, slip-on handle
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business