A-A-53446
The enema unit shall be provided with a positive acting shut-off clamp, attached to the tubing, which by compression of the tubing shall be capable of accomplishing complete shut-off. The shut-off clamp shall be made of a suitable corrosion-resistant metal or a suitable plastic, such as polypropylene or polyethylene, of sufficient thickness that the tubing will not be cut when the clamp has closed off the pat.
Two-thirds of a fluid ounce of liquid castile soap shall be supplied in each enema unit.
The enema unit shall contain one disposable, absorbent underpad, approximately 17 inches by 19 inches, folded approximately 5 inches by 8-1/2 inches. The underpad shall have a three-ply thickness of wet strength facial tissue especially embossed to give softness and high absorbency. The pad shall be backed with a layer of soft pliable plastic film providing complete moisture barrier protection.
The enema unit shall contain one set of instructions for use.
Workmanship. The enema unit fountain syringe shall be free from defects which detract from its appearance or impair its serviceability.
Unit. Each (EA). One syringe, with instructions for use, as specified, constitutes one unit.
Quality Assurance Provisions.
Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contact or purchase order, the contractor may use his own or any facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business