A-A-53326
Both the paper and plastic surface of the sterilization envelope shall be sufficiently permeable to permit contents to be sterilized via steam and ethylene oxide, and sufficiently impermeable after sterilization so that contamination from the atmosphere shall not enter the closed envelope.
Both the paper and plastic surfaces of the envelope shall be strong enough to minimize wrapper perforation. The film surface shall be clear for easy product identification.
The sterilization envelope shall be free of tears, cuts, holes, perforations, grease, dirt, or foreign matter.
Workmanship. The sterilization envelope shall be free from defects which detract from its appearance or impair its serviceability.
Unit. Package (PG). One package containing ten packaged envelopes, as specified, constitutes one unit. The package shall be a sealed peel-open type container capable of maintaining sterility of contents unless the package is damaged or opened.
Quality Assurance Provisions.
Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contact or purchase order, the contractor may use his own or any facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements.
Records. Records of examinations and tests performed by or for the contractor shall be maintained by the contractor and made available to the Government upon the Government’s request, at any time, or from time to time, during the performance of the contract and for a period of three years after delivery of the supplies to which such records relate.
Inspection. Inspection, as used herein, is defined as both examination (such as visual or auditory investigation without the use of special laboratory appliances or procedures) and testing (determination by technical means of physical and chemical properties) of the item.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business