A-A-51988
The threaded portion of the screw and screw socket shall have acme machined threads which shall permit easy height adjustment of the seat without noise, chatter, or play.
Welding shall be durable, sound in every detail, and in accordance with the latest practices recommended by the American Welding Society. All welds shall be continuous with no visible voids, pin holes, or cracks.
All exposed surfaces shall be free of rocking when the four legs are placed on a smooth flat surface.
Seat shall maintain height either free standing or under normal load.
Stool shall be free of sharp edges.
The surgeon’s tool shall meet the standards of NFPA 99.
Workmanship. The revolving stool shall be free from defects which detract from its appearance or impair its serviceability.
Unit. Each (EA). One revolving stool, as specified, constitutes one unit.
Quality Assurance Provisions.
Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contact or purchase order, the contractor may use his own or any facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements.
Records. Records of examinations and tests performed by or for the contractor shall be maintained by the contractor and made available to the Government upon the Government’s request, at any time, or from time to time, during the performance of the contract and for a period of three years after delivery of the supplies to which such records relate.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business