A-A-51984
TABLE I. Sampling for examination.
|
|
Inspection level |
AQL (defects per hundred units) |
|
For visual examination |
|
|
|
Major defects |
II |
1.0 |
|
Total defects (Major and minor combined) |
II |
4.0 |
|
For dimensional examination |
S-1 |
2.5 |
Examination. The treatment table shall be examined to determine compliance with all requirements contained in this specification.
Classification of defects. Examination shall be conducted in accordance with the classification of defects listed in table II. Examination shall not be restricted to the classified possible defects below.
TABLE II. Categories and Defects.*
|
Categories |
Defects |
|
Major |
|
|
101 |
Table not the correct width, length, or height. |
|
102 |
Table does not have a full length lower shelf or an upper smooth-gliding, pull out drawer. |
|
103 |
Table legs are not at least 3 inches in diameter or at least 3 inches square. |
|
104 |
Metal hardware is not corrosion-resisting. |
|
105 |
Table does not have a 2 inch thick, foam pad covered with fire-resistant, acid-resistant, vinyl upholstery, sized to fit the entire table. |
|
106 |
Table does not have a raised rim to prevent the pad from slipping. |
|
107 |
Table not provided with adjustable arm board. |
|
Minor |
|
|
201 |
The foam pad has voids or objectionable odor. |
|
202 |
Table finish is not and uniform or free of scratches, splinters, and discoloration. |
|
203 |
Table corners are not rounded or edges smooth |
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business