A-A-51845
The cabinet shall be mounted on four 3 inch (7.62 cm) minimum diameter ball-bearing casters. The casters shall be quiet and smooth rolling.
Welds shall be complete with no breaks or cracks. Welds shall be continuous, ground smooth to blend with adjacent surfaces, and clean with no pitting, spatter, or discoloration.
The cabinet finish shall be uniform and free of scratches, discoloration, and burrs.
The cabinet shall be so constructed that all corners shall be rounded and edges smooth so that there will be no danger of cutting the hands of the operator by sharp corners, or tearing of clothing of an operator who may inadvertently brush against the item in passing.
Workmanship. The electrocardiograph cabinet shall be free from defects which detract from their appearance or impair its serviceability.
Unit. Each (EA). One electrocardiograph cabinet, as specified, constitutes one unit.
Quality Assurance Provisions.
Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contact or purchase order, the contractor may use his own or any facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements.
Records. Records of examinations and tests performed by or for the contractor shall be maintained by the contractor and made available to the Government upon the Government’s request, at any time, or from time to time, during the performance of the contract and for a period of three years after delivery of the supplies to which such records relate.
Inspection. Inspection, as used herein, is defined as both examination (such as visual or auditory investigation without the use of special laboratory appliances or procedures) and testing (determination by technical means of physical and chemical properties) of the item.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business