A-A-51770
The overall height of the assembled bottle and screw-cap closure shall not exceed 4-9/16 inches.
The bottle shall have a 4.0 fluid ounce (120 ml) capacity. When filled to the bottom level of the screw neck with water at room temperature (25 degrees Centigrade ± 5 degrees) the fill of the bottle shall be 125 ml (± 10, - 5 ml).
The manufacturers normal commercial color for the bottle and screw-cap shall be acceptable, but shall be shall be in contrasting color with the required printing.
The bottle and top of the screw-cap shall be permanently and legibly printed with the information specified below:
a. On the face of each bottle shall appear:
“BOTTLE FOR COPPER SULFATE SOLUTION, 4 OZ.
NSN 6530-00-149-0093
b. On the back of each bottle shall appear:
“Directions for Use on Phosphorous Burns:
Prepare fresh copper sulfate solution. Use 1% concentration only. Wet burns with solution. Do not cover burns with wet pads. Lavage wound thoroughly with normal saline solution, or water if normal saline is not available. Coated phosphorous particles may then be removed”
c. On the top of the screw-cap shall appear:
“COPPER SULFATE SOLUTION BOTTLE”
The printing shall be clear, distinct and legible, of contrasting color to the finish on the bottle and screw-cap, and shall not be smeared or removed during normal handling.
Workmanship. The bottle screw-cap, including printing, shall be free from defects which detract from their appearance or impair their serviceability.
Unit. Each (EA). One bottle with screw-cap, as specified, constitutes one unit.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business