A-A-51448A
|
Defects. |
|
Table is not complete with all components. |
|
Table does not sit evenly on a flat surface. |
|
Casters do not swivel or roll smoothly, quietly, or evenly. |
|
Exposed welds are not ground smooth to blend with adjacent surfaces. |
|
Welds are not continuous, not clean, or not free of pitting, splatter, or discoloration. |
|
Exposed or accessible edges, corners, or surfaces, are not free of burrs, sharpness, or sharp projections. |
|
Finish is not uniform and free of coarse grind marks or scratched areas. |
|
Table is not clean and free of oil, grease, dirt, or other contamination. |
Sampling for tests. Sampling for tests, including dimensional test, shall be conducted in accordance with MIL-STD-105, with an AQL of 2.5 (percent defective) and an inspection level of S-3. The unit of product for test purposes shall be one surgical instrument and surgical dressing table.
a. First article. Where a first article sample is required, all tests shall be performed on that unit.
b. Acceptance testing. When a first article sample has not been required, one unit shall be subjected to the performance test specified herein. If a test article sample has successfully passed all tests, performance test shall not be required at acceptance.
Tests.
Electrical conductivity. The assembled table, complete with casters, shall be tested in accordance with National Fire Protection Association (NFPA) Standard No. 99, Health Care Facilities. Failure to meet electrical conductivity standards shall constitute a defect.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business