A-A-51267A
The pack shall contain one radiopaque vaginal packing sponge, approximately 4-1/3 by 18 inches (11.4 by 45.7 cm). It shall have at least a 6 inch (15.2 cm) braided textile loop to maintain visibility of the pack.
All nonwoven items shall be fabricated of a soft material with minimal memory for good draeability. The fabric shall resist tearing pilling and linting.
The pack shall be sterile and individually wrapped in a suitable tear resistant, heat sealed package which will allow aseptic handling and maintain sterility of the contents until opened or damaged.
Each pack shall also be wrapped in a heat sealed exterior dust cover.
All pack components shall be clearly listed on the exterior wrapper.
Workmanship. The surgical packs shall be free from defects which detract from their appearance or impair their serviceability.
Unit. Package (PG). One package containing four (4) or five (5) individually sealed packs, as specified, constitutes one unit.
Quality Assurance Provisions.
Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contact or purchase order, the contractor may use his own or any facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements.
Records. Records of examinations and tests performed by or for the contractor shall be maintained by the contractor and made available to the Government upon the Government’s request, at any time, or from time to time, during the performance of the contract and for a period of three years after delivery of the supplies to which such records relate.
Inspection. Inspection, as used herein, is defined as both examination (such as visual or auditory investigation without the use of special laboratory appliances or procedures) and testing (determination by technical means of physical and chemical properties) of the item.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business