A-A-51030C
Accuracy of markings shall be plus or minus 13 percent throughout the actual marked range.
The exerciser shall include a mouthpiece, flexible patient tube at least 3 decimeters long with an ID of approximately 22 mm, filtration between the intake port and operating elements, and instructions for use. If the markings are not identified as cc/sec then the instruction shall provide a cross-reference/formula from the markings to cc/sec.
Workmanship. The pulmonary exercise unit shall be free from defects which detract from its appearance or impair its serviceability.
Unit. Package (PG). One package containing 12 individually packaged pulmonary exerciser, as specified, constitutes one unit. Each pulmonary exercise device shall be clean and sealed in an individual package which identifies the device for single patient use.
Quality Assurance Provisions.
Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contract or purchase order, the contractor may use his own or any facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements.
Records. Records of examinations and tests performed by or for the contractor shall be maintained by the contractor and made available to the Government upon the Government’s request, at any time, or from time to time, during the performance of the contract and for a period of three years after delivery of the supplies to which such records relate.
Inspection. Inspection, as used herein, is defined as both examination (such as visual or auditory investigation without the use of special laboratory appliances or procedures) and testing (determination by technical means of physical and chemical properties) of the item.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business