A-A-51022
10 October 1985
COMMERCIAL ITEM DESCRIPTION
TRAY, MEDICINE
The General Services Administration has authorized the use of this commercial item description in preference to Interim Federal Specification RR-T-0064D.
This specification covers a stainless steel, rectangular medicine tray suitable for use in military treatment facilities.
Salient characteristics:
Shall be rectangular tray, without a cover, and suitable for carrying catheter trays, thermometer technique equipment and medicines to a patient’s bedside.
The tray shall be formed seamlessly from one piece of .031 inch thick corrosion-resisting steel, American Iron and Steel Institute (AISI) 300 series, which shall not be reduced below 0.25 inch thick at any point.
The tray shall have approximate dimensions of 13-1/2 inches long, 9-5/8 inches wide, and 5/8 inch deep. Upper lip shall be approximately 1/8 inch. Corner radius (at top of tray) shall be approximately 1-1/4 inches maximum.
The tray shall rest on all four bottom corners on a level surface without rocking or wobbling. The bottom may concave inward so that the highest point shall be approximately more than 1/16 inch above the surface upon which it rests.
Tray surface shall have a uniform #4 commercial finish or better and be readily cleanable.
The tray shall be free of sharp edges, burrs, pits, dents, cracks, ripples, and deformities.
Workmanship. The medicine tray shall be free from defects which detract from its appearance or impair its serviceability.
Unit. Each (EA). Each tray, as specified constitutes one unit.
Contractor certification. The contractor shall certify and maintain substantiating evidence that the product offered meets the salient characteristics of this Commercial Item Description, and that the product conforms to the producers’ own drawings, specifications, standards, and quality assurance practices. The government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business