A-A-30051C
Type II – Irrigation kit shall consist of the following components:
Plastic PLUNGER type syringe (60 ml/cc) with protection tip cover; catheter tip syringe opening shall be 3/16 inch minimum ID; finger grip on barrel of syringe. Plunger may include control ring.
Minimum 1000 ml/cc capacity graduated plastic tray or basin.
Minimum 500 ml/cc capacity graduated plastic solution container.
A waterproof underpad, minimum size 16 by 18 inches
NOTE: For Department of Defense (DoD) procurements, the following additional component is required:
An iodophor prepad.
Workmanship. The irrigation kit shall be free from defects which detract from its appearance or impair its serviceability.
Unit. Package (PG). One package containing 20 irrigation kits, each kit individually packaged, sterile in a scaled peel open type container, constitutes one unit. The unit for VA requirements shall appear on the solicitation.
Metric products. Product manufactured in metric dimensions will be considered on an equal basis with those manufactured using inch-pound units, providing they fall within the tolerances specified using conversion tables contained in the latest revision of Federal Standard 376, and all other requirements of this document are met.
If a product manufactured in metric dimensions and those dimensions exceed the tolerances specified in the inch-pound units, a request should be made to the contracting officer to determine if the product is acceptable. The contracting officer has the option of accepting or rejecting the product.
The contracting officer has the option of accepting or rejecting the product.
Contractor certification: The contractor shall certify that the product offered meets the salient characteristics of this description and conforms to the producer’s own drawings, specifications, standards, and quality assurance practices. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business