A-A-30050D
July 1, 1986
SUPERSEDING
A-A-30050C
February 2, 1984
COMMERCIAL ITEM DESCRIPTION
STANDS, INTRAVENOUS-IRRIGATION CONTAINER
The General Services Administration has authorized the use of this commercial item description in preference to Federal Specification RR-S-709B, Amendment 1.
This commercial item description describes a stand for use in suspending solution containers during administration of intravenous solutions, blood, etc.
Salient characteristics. Stands, Intravenous-Irrigation, Container, stainless steel, automatic locking control for one hand operation, adjustable telescoping height from a low of 73 inches plus or minus 2 inches to a height of 106 inches plus or minus 2 inches; two (2) hooks, one (1) at each end of crossbar; crossbar overall length 13 inches plus or minus 1/4 inch, hooks either pig tail or lock style. Crossbar welded to upright; minimum distance of 16-1/2 inches between the center line of stem of the glides or casters; base shall be weighted with a minimum of 9 lbs. and designed to avoid tipping, The stand, when raised to a height of 7 feet above the floor and tilted to a 23 degree angle and released, shall return to an upright position, The stand shall be free of dirt catching crevices. All welds shall be ground and polished. Stand shall be shipped knocked down with minimum assembly required. Assembly instructions shall be furnished with each unit.
Type I - Stand supported leg glides
Type II - Stand supported by four 2 inch electrically conductive casters.
Metric products. Products manufactured to metric dimensions will be considered on an equal basis with those manufactured using inch-pound units, providing they fall within the tolerances specified using conversion tables contained in the latest revision of Federal Standard 376, and all other requirements of this commercial item description are met.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business