A-A-51340
30 March 1990
SUPERSEDING
A-A-51340
14 February 1986
COMMERCIAL ITEM DESCRIPTION
IRRIGATOR (Corrosion-Resisting Steel)
The General Services Administration has authorized the use of this Commercial Item Description as a replacement for Federal Specification RR-I-681 which is cancelled.
This Commercial Item Description covers a corrosion-resisting steel irrigator.
Salient characteristics:
The irrigator shall have a two quart plus or minus 1/4 quart capacity and shall not have a handle or cover. The irrigator shall have a lower spout to accommodate tubing and an upper hole to allow hanging on an irrigator stand. The irrigator shall have an outside diameter of 5 inches plus or minus 1/2 inch with a height of 7-1/2 inches plus or minus 1/2 inch.
The irrigator shall be formed seamlessly from one single piece of corrosion-resisting steel, American Iron and Steel Institute (AISI) 300 Series with a thickness of not less than 0.031 inch (No. 22 United States Standard gauge). The steel shall not be reduced below 0.024 inch in thickness at any point in the finished irrigator. The irrigator shall have a tight, flat, double rolled, beaded edge. The upper hole for hanging the irrigator on a stand shall have a 5/16 inch minimum diameter and a 9/16 inch maximum diameter.
The irrigator spout shall be made of seamless corrosion-resisting steel tubing, pitched downward, and attached in a secure and permanent manner. The method of attachment shall leave no corners, crevices, pits, or other rough or uneven surfaces to retain dirt. The spout shall have a lumen of uniform diameter not less than 0.240 inch with a wall
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business